Know where your machines are and how long they run
Excavators, loaders, tractors and generators have no mileage – they have engine hours. The system logs them from ignition on to off, remembers where the machine worked and reports if it moves out of the zone outside working hours.
What costs you money today
- 01
Working hours are written by hand
The operator writes 8 hours, the machine ran 5. Billing the investor and servicing by real hours become guesswork.
- 02
A machine leaves the site at night
An €80,000 excavator sits in the open. When it goes missing, it is usually noticed in the morning, when it is already far away.
- 03
Service by calendar, not by work
Oil and filters change by date, not by engine hours. One machine is over-serviced, another stops mid-job.
How VISION GPS solves it
The unit connects to the machine's ignition. From then on every engine hour and every metre of movement is recorded automatically, with no paper and no operator.
- Engine hours today
- Excavator7.4 h
- Loader5.1 h
- Roller2.6 h
- Engine hours, automaticallyThe platform counts hours while the engine runs, per machine and per day. The report goes straight into billing and the service plan.
- A geofence around the siteDraw a zone around the site. The moment a machine leaves it, you get a notification, day or night.
- Use outside working hoursAn engine started at 11 pm or at the weekend is reported immediately. Unauthorised use stops being invisible.
From installation to the first result
- Step 1
Installation on the machine
A 12/24 V unit, protected from vibration and moisture, wired to the ignition. Works on older machines without a computer too.
- Step 2
Drawing geofences
Mark sites and the yard on the map. Zones can change as the work moves.
- Step 3
Hours and billing
A report of hours per machine and per day, for invoicing the investor and for service intervals.
- Step 4
Notifications
Leaving a zone, a night start, long idling: you choose what is reported and who gets it on the phone.
What you get
- Engine hours for invoicing and servicing
- Geofence around the site or the field
- Alarm on movement outside working hours
- Engine block with your confirmation
One day with the system
Exact hours for billing and service, and a machine that moves at night is no longer invisible.
The example is illustrative; names and numbers are fictional.
- 07:05The excavator starts on the site in Veternik. The hour counter begins.
- 12:00By noon, 4.8 engine hours. The operator writes nothing down.
- 22:14The excavator leaves the site geofence. The owner and the site manager get the alert.
- 22:16The manager calls security and the police with the exact location. The machine is stopped on the way out of town.
- +1 dThe monthly invoice to the investor goes out with the report of real engine hours, with no argument.
Ready to take control of your fleet?
Send an enquiry and we will get back to you within one working day with a proposal and a price.